> ## Content Index
> Fetch the complete content index at: https://acentricresearch.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# Perovskite and tandem solar-cell materials: Junction Brief – November 2026
- URL: https://acentricresearch.com/research/perovskite-tandem-solar-materials-brief-2026-11/
- Published: 2026-11-21T09:47:11.000Z
- Updated: 2026-11-21T09:47:11.000Z
- Author: Kevin Meyer
- Tags: energy-materials, junction-brief

> Acentric Research is produced with AI tools under human review. The authors are not financial professionals, and nothing here is investment advice or a recommendation to buy or sell any security. AI analysis can be wrong; check every claim against its cited source.

This Brief is an initial scan, not a full investigation. The method and scores behind it are in [Energy × Materials in the Landscape Report](https://acentricresearch.com/research/landscape-2026-11/#energy-materials).

### Overview

A standard solar panel is made of silicon, which converts only part of the sunlight that reaches it. Perovskite is a class of crystal that absorbs light well and can be coated onto silicon, so that each layer captures a different part of the spectrum. The result is called a tandem cell. The material is what raises the efficiency, so this is a case where a new material changes what an energy technology can do.

What stands out is that a tandem panel has reached a customer. In September 2024 Oxford PV said it had made the first commercial shipment of perovskite tandem panels, to a US customer for a utility-scale installation. \[1\] That is a company claim, and the sources opened do not report how the panels have performed since. The sources opened date from 2020 and 2024, and later developments, including any newer shipments or efficiency records, were not searched.

### Current state

**What the technology does.** Oxford PV says its 72-cell panels, built from perovskite-on-silicon cells, can produce up to 20% more energy than a standard silicon panel. It reports a module efficiency of 24.5% for the first panels on the market and a record of 26.9% for a module. \[1\]

**Who is working on it.** Oxford PV says it has been developing the technology since 2014 and makes its cells on a megawatt-scale pilot line in Brandenburg an der Havel, Germany. \[1\] In May 2024 DOE's Solar Energy Technologies Office announced its awardees in a thin-film funding programme that includes a topic on perovskite tandem manufacturing. The four perovskite tandem projects were chosen for awards of $4.7 million to $7 million each, with cost share from the companies (amounts rounded and subject to negotiation, the page says): Cubic PV and Swift Solar on perovskite-silicon tandems, First Solar on a perovskite and copper indium gallium diselenide tandem, and Tandem PV on ultraviolet durability. \[2\] The same programme also funds work on cadmium telluride, a different thin-film solar material that is not a perovskite. \[2\] DOE had earlier announced $20 million in 2020 for perovskite work in three areas: efficiency and stability at cell or mini-module scale, manufacturing at relevant scale and throughput, and a neutral validation centre meant to verify device performance and address acceptance by the investment and finance communities. \[3\]

**What each project does.** Cubic PV's project uses a four-terminal design, in which the perovskite device layer can be tuned without changing the silicon layer, and monitors the devices during fabrication to make the process reproducible. \[2\] First Solar's project aims at modules with 27% efficiency that can be made easily, and includes scale-up from mini-modules and durability tests. \[2\] Swift Solar's project uses vapour deposition, which the programme page calls a promising method for high-volume manufacturing, and aims at modules that can operate reliably for decades in the field. \[2\] Tandem PV's project aims to build ultraviolet resistance into critical layers of the device. \[2\]

**How far it has come.** One company says it made a first commercial shipment in September 2024\. No independent confirmation of installation or field performance was found. Research continues on durability and manufacturing. \[1\]\[2\]

### Opportunities

Oxford PV says tandem panels can reduce the cost of electricity from a utility-scale installation and use land more efficiently, since more electricity comes from the same area. \[1\] The company says it plans to supply more utility customers, specialty products and pilot residential applications from its German facility. \[1\] DOE's 2024 projects aim at tandem modules that can be made by methods suited to high-volume manufacturing, such as vapour deposition of the perovskite layer. \[2\] The 2020 programme's validation centre was also meant to examine the environmental impact of perovskite technologies. \[3\] The programme page also describes the thin-film effort as a chance to strengthen the domestic solar supply chain. \[2\]

### Challenges

- **Physics.** DOE says that for perovskite to be competitive, its long-term durability must be tested and verified, and its 2020 programme set out to improve understanding of perovskite stability. \[3\] DOE's 2024 programme page says ultraviolet light can damage perovskite devices and that standard outdoor durability tests do not account for it. \[2\]
- **Engineering.** Oxford PV makes its cells on a megawatt-scale line and says it plans to scale to gigawatt scale at a future high-volume site. \[1\] DOE's 2020 programme lists manufacturing perovskite modules at relevant scale and throughput as a challenge, and the 2024 projects include process control and reproducibility. \[3\]\[2\]

### Data sources

- **DOE Solar Energy Technologies Office programme pages and award lists**, for funded projects. \[2\]
- **NREL best research-cell efficiency chart**, for efficiency records. \[4\]
- **Company press releases**, for shipments and product claims; no independent registry of tandem deployments or field performance was found.
- **SEC EDGAR**, for filings of public companies. \[5\]

### Changelog

- 2026-11-18: First published.

### Sources

1. Oxford PV, "20% more powerful tandem solar panels enter commercial use for the first time in the US", 2024-09-05 (company press release; the claims are the company's). [oxfordpv.com](https://oxfordpv.com/news/20-more-powerful-tandem-solar-panels-enter-commercial-use-first-time-us?ref=acentricresearch.com) (accessed 2026-11-18)
2. US Department of Energy, Solar Energy Technologies Office, "Advancing U.S. Thin-Film Solar Photovoltaics Funding Program" (programme page, last updated 2024-05-21; opening text says selections were announced 2024-05-16). [energy.gov](https://www.energy.gov/cmei/systems/advancing-us-thin-film-solar-photovoltaics-funding-program?ref=acentricresearch.com) (accessed 2026-11-18)
3. US Department of Energy, "Department of Energy Announces $20 Million to Advance Perovskite Solar Technologies", 2020-08-13 (agency release). [energy.gov](https://www.energy.gov/articles/department-energy-announces-20-million-advance-perovskite-solar-technologies?ref=acentricresearch.com) (accessed 2026-11-18)
4. National Renewable Energy Laboratory, "Best Research-Cell Efficiency Chart". [nrel.gov](https://www.nrel.gov/pv/cell-efficiency.html?ref=acentricresearch.com) (listed as a data source; not opened for this Brief)
5. SEC EDGAR, full-text search. [sec.gov](https://www.sec.gov/edgar/search/?ref=acentricresearch.com) (listed as a data source; not run for this Brief)