> ## Content Index
> Fetch the complete content index at: https://acentricresearch.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# Microgravity materials processing and in-space manufacturing: Junction Brief – November 2026
- URL: https://acentricresearch.com/research/in-space-manufacturing-brief-2026-11/
- Published: 2026-11-21T10:17:00.000Z
- Updated: 2026-11-21T10:17:00.000Z
- Author: Kevin Meyer
- Tags: materials-space, junction-brief

> Acentric Research is produced with AI tools under human review. The authors are not financial professionals, and nothing here is investment advice or a recommendation to buy or sell any security. AI analysis can be wrong; check every claim against its cited source.

This Brief is an initial scan, not a full investigation. The method and scores behind it are in [Materials × Space in the Landscape Report](https://acentricresearch.com/research/landscape-2026-11/#materials-space).

### Overview

On Earth, gravity shapes how materials form. In orbit, a material can be made while nearly weightless, and some producers think this can give better products. NASA reports that fibres of ZBLAN, a fluoride glass used for optical fibre, produced in microgravity were smoother and more uniform than those produced in ground-based laboratories. \[1\] A second idea is to manufacture or assemble spacecraft parts in orbit rather than launch them finished; ESA's Discovery programme has studied this since 2019\. \[2\]

What stands out is the range of stages. NASA-supported fibre payloads have flown to the International Space Station, Redwire has a printer operating there, and Varda says it processes materials in orbit and returns them to Earth. \[1\]\[3\]\[4\] The sources opened date from 2022 to 2026, mostly from 2022 to 2024; later results and flights were not searched. In particular, the results of the 2022 fibre payloads were not found, and Varda's own records of its missions were not opened beyond its home page.

### Current state

**What the technology does.** Two NASA-supported payloads reached the station in July 2022: Space Fibers 3 from FOMS, Inc. of San Diego and the Orbital Fiber Optic Production Module (ORFOM) from Mercury Systems of Torrance, California. NASA says they were to demonstrate automated production of optical fibre in microgravity. In earlier station tests, NASA says the Mercury team made fibre up to 65 feet (20 metres) long, but the process was mostly manual and so slow and costly. The NASA article's claim of superior structure rests on suborbital work from NASA's Marshall Space Flight Center and on parabolic flights, which give brief spells of weightlessness; it is NASA's statement, and the article reports no result from the 2022 payloads. \[1\]

**Who is working on it.** Redwire, a space-infrastructure company, says its additive manufacturing facility, which began operating on the station in 2016, has made over 200 tools, parts and assets, and describes FabLab as a multi-material 3D printer that could make tools, parts and printed circuit boards on demand from metal, plastic, ceramics and electronics. NASA awarded it $5.9 million in March 2023 to complete the design, and the company says testing on the station is expected (these are company statements). \[3\] ESA set up its OMAR (On-orbit Manufacture, Assembly and Recycle) initiative in 2019, followed by four industry-run studies in 2019–2021\. One study, by Thales Alenia Space, concluded that 95% of a spacecraft could potentially be assembled in orbit and under 30% manufactured there; it proposed starting with refurbishment. \[2\]

Varda describes its work as processing materials in orbit and returning them to Earth, and its site lists a hypersonic testbed for government and a biopharma service. \[4\] A directory record, not a company source, says its capsule W-4, built in-house, launched in June 2025\. \[5\] In 2024 the US Air Force Research Laboratory contracted Varda for $48 million over four years to test military payloads on its capsules at hypersonic speeds; that contract is about flight testing, not about making materials. \[6\]

**How far it has come.** NASA-supported fibre payloads were sent to the space station in 2022 and Redwire reports a 3D printer operating there since 2016; Varda says it returns processed materials from orbit, though no mission record was opened. Whether orbit-made fibre beats ground-made fibre in a product is not shown by the sources opened.

**What the agencies say is still to be proven.** NASA's portfolio manager for its In Space Production Applications project, which chose the FOMS and Mercury hardware for station demonstrations, says "The science is sound – but the best manufacturing approach needs to be further matured and validated on orbit." NASA says each payload's fibre runs on the station were expected to last up to two weeks, and that the project would assess the results to inform future hardware and "potential optical fiber manufacturing in space in the coming years". FOMS's chief scientist says the team redesigned its fibre-processing hardware after the first of three parabolic flights and made over 100 feet (30 metres) of fibre on the later two. \[1\] ESA's third study, by Airbus, concluded that platform and support technologies could be developed at relatively low risk, but that in-orbit manufacturing technologies, materials and processes, "are still in their infancy and their feasibility is uncertain", especially additive manufacturing of metals and liquid glues. Airbus also explored building large antennas in orbit, a 20-metre and a 30-metre design, and proposed a "brick reflector" made of hundreds of bricks manufactured on Earth. \[2\]

### Opportunities

NASA says optical fibres carry data over longer distances and at higher bandwidths than electrical cables, and that potential performance improvements from microgravity manufacturing have spurred interest in space-based manufacturing. \[1\] ESA says manufacturing and assembly in orbit could make launches more efficient, allow lighter satellites and lower initial investment because satellites could be rebuilt during their lifetimes; refurbishing, it says, is the nearer-term goal. \[2\] Redwire says FabLab could ease logistics for crews far from Earth. \[3\]

### Challenges

- **Engineering.** NASA says the earlier station process was largely manual and costly, and that teams used parabolic flights to test automation to reduce astronaut involvement. \[1\] ESA's questions include quality control of structures built in space and printing in a vacuum. \[2\]
- **Economics.** Thales Alenia Space's study says it is unclear whether the resources used to capture and process waste in space would exceed those saved by recycling. \[2\]
- **Scale-up.** Redwire's contract completes a design; a follow-on contract to build and test a unit was described as anticipated. \[3\]

### Data sources

- **NASA program and Flight Opportunities pages**, for payload flights and results. \[7\]
- **ESA Discovery pages**, for OMAR studies. \[8\]
- **SAM.gov and USAspending.gov**, for contracts such as AFRL's. \[9\]
- **SEC EDGAR**, for company filings. \[10\]
- No registry of materials made in orbit was found.

### Changelog

- 2026-11-19: First published.

### Sources

1. NASA, "NASA-Supported Optical Fiber Manufacturing Arrives at Space Station", 2022-07-18 (agency article). [nasa.gov](https://www.nasa.gov/centers-and-facilities/armstrong/nasa-supported-optical-fiber-manufacturing-arrives-at-space-station?ref=acentricresearch.com) (accessed 2026-11-19)
2. ESA, "Constructing, recycling and refurbishing satellites in space", 2024-04-16 (agency article). [esa.int](https://www.esa.int/Enabling%5FSupport/Preparing%5Ffor%5Fthe%5FFuture/Discovery%5Fand%5FPreparation/Constructing%5Frecycling%5Fand%5Frefurbishing%5Fsatellites%5Fin%5Fspace?ref=acentricresearch.com) (accessed 2026-11-19)
3. Redwire Corporation, "Redwire Wins NASA Contract to Advance New In-Space Manufacturing Capability for Journeys to Moon, Mars and Beyond", 2023-03-23 (company release; claims are the company's). [ir.rdw.com](https://ir.rdw.com/news-events/press-releases/detail/80/redwire-wins-nasa-contract-to-advance-in-space?ref=acentricresearch.com)(accessed 2026-11-19)
4. Varda Space Industries, company home page (describes itself; carries the announcement "Varda's W-9 Capsule Returns from Orbit", undated). [varda.com](https://varda.com/?ref=acentricresearch.com) (accessed 2026-11-19)
5. Factories in Space, Varda Space page (directory record, updated 2025-09-07; not a company or agency source). [factoriesinspace.com](https://www.factoriesinspace.com/varda-space?ref=acentricresearch.com) (accessed 2026-11-19)
6. Lifeboat Foundation blog, "U.S. Air Force awards Varda $48 million to test payloads on reentry capsules", 2024-12-02 (blog copy of a SpaceNews item). [lifeboat.com](https://lifeboat.com/blog/2024/12/u-s-air-force-awards-varda-48-million-to-test-payloads-on-reentry-capsules?ref=acentricresearch.com) (accessed 2026-11-19)
7. NASA Space Technology Mission Directorate, Tipping Point and Flight Opportunities program pages. [nasa.gov](https://www.nasa.gov/space-technology-mission-directorate/?ref=acentricresearch.com)(listed as a data source; not opened for this Brief)
8. NASA, Space Technology Mission Directorate and Armstrong Flight Research Center program pages, NASA Technical Reports Server, ESA Discovery pages (listed as data sources; not searched for this Brief). [ntrs.nasa.gov](https://ntrs.nasa.gov/?ref=acentricresearch.com)
9. SAM.gov and USAspending.gov, federal contract and award records. [usaspending.gov](https://www.usaspending.gov/search?ref=acentricresearch.com) (listed as a data source; not opened for this Brief)
10. SEC EDGAR, full-text search. [sec.gov](https://www.sec.gov/edgar/search/?ref=acentricresearch.com) (listed as a data source; not run for this Brief)